CHWLG - PYRONIN Y CERTIFIED, P6653
- MSDS: CHWLG
- Manufacturer: SIGMA CHEMICAL CO
- Product Name: PYRONIN Y CERTIFIED, P6653
- National Stock Number: 6550-00N089712
Product Identification
Product ID:PYRONIN Y CERTIFIED, P6653
MSDS Date:07/11/1994
FSC:6550
NIIN:00N089712
Status Code:A
MSDS Number: CHWLG
Responsible Party
US
Emergency Phone: 314-771-5765
Info Phone: 800-325-3010
Cage: 21076
Contractor
Telephone: 314-771-5765
Cage: 21076
Ingredients
AMMONIUM, (6-(DIMETHYL AMINO)-3H-XANTEN-3-YLIDENE)
CAS: 92-32-0
RTECS: BQ1450000
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HARMFUL IF SWALLOWED, INHALED
OR ABSORBED THROUGH SKIN. MAY CAUSE IRRITATION. CHRONIC: LABORATORY
EXPERIMENTS HAVE SHOWN MUTAGENIC EFFECTS. TO THE BEST OF
MANUFACTURER'S KNOWLEDGE, THE CHEMICAL , PHYSICAL AND TOXICOLOGICAL
PROPERTIESHAVE NOT BEEN THOROUGHLY INVESTIGATED. TARGET ORGAN DATA:
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: KIDNEY, URETER, BLADDER (CHANGES IN
TUBULES). ONLY SELECTED REGISTRY OF TOXIC EFFECTS OF CHEMICAL
SUBSTANCES (RTECS) DATA IS PRESENTED HERE. SEE ACTUAL ENTRY IN
RTECS FOR COMPLETE INFORMATIO N.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: IN CASE OF CONTACT, IMMED FLUSH EYES W/COPIOUS AMOUNTS
OF WATER FOR AT LEAST 15 MINUTES. SKIN: IN CASE OF CONTACT, IMMED
WASH SKIN W/SOAP AND COPIOUS AMOUNTS OF WATER. INHAL: REMOVE TO
FRESH AIR . IF NOT BREATHING GIVE ARTIFICIAL RESPIRATION. IF
BREATHING IS DIFFICULT, GIVE OXYGEN. INGEST: WASH OUT MOUTH W/WATER
PROVIDED PERSON IS CONSCIOUS. CALL MD. WASH CONTAMINATED CLOTHING
BEFORE REUSE.
Fire Fighting
Extinguishing Media:WATER SPRAY. CARBON DIOXIDE, DRY CHEMICAL POWDER OR
APPROPRIATE FOAM.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
Accidental Release
Spill Release Procedures:WEAR NIOSH APPROVED SELF-CONTAINED BREATHING
APPARATUS, RUBBER BOOTS AND HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN
A BAG AND HOLD FOR WASTE DISPOSAL. AVOID RAISING DUST. VENTILATE
AREA AND WASH SPILL SI TE AFTER MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP TIGHTLY CLOSED. UNPLEASANT ODOR.
STORE IN A COOL, DRY PLACE.
Other Precautions:DO NOT BREATHE DUST. DO NOT GET IN EYES, ON SKIN, ON
CLOTHING. AVOID PROLONGED OR REPEATED EXPOSURE. WASH THOROUGHLY
AFTER HANDLING. POSSIBLE MUTAGEN.
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE NIOSH APPROVED RESPIRATOR.
Ventilation:USE ONLY IN A CHEMCIAL FUME HOOD.
Protective Gloves:CHEMICAL-RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
WEAR SUITABLE PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:>482F,>250C
Appearance and Odor:GREEN CRYSTALS.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF: CARBON MONOXIDE,
CARBON DIOXIDE, NITROGEN OXIDES, HYDROGEN CHLORIDE GAS.
Disposal
Waste Disposal Methods:DISSOLVE OR MIX THE MATERIAL WITH A COMBUSTIBLE
SOLVENT AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN
AFTERBURNER AND SCRUBBER. OBSERVE ALL FEDERAL, STATE AND LOCAL
ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.